English   Deutsch   English   Français
You are here: Products > Milling > UFM Vision 210 > optional equipment & downloads

the range of functions can be expanded with the following options • please click on the plus-symbol on the right side for more information (Kopie 1)

• table variants & equipment

  • table size 2.000 x 820 mm, with extendable frame support by 480 mm
  • table extension on both ends, with extendable frame support by 480 mm
  • special table insert for using moulding board or safety rulers, for the secure working and guiding of workpieces from below (safety rulers, order-no. 5061, are not included but recommended)
table size 2.000 x 820 mm
special table insert

• equipment for milling fences

  • splinter tongue • aluminium anodized
  • safety rulers • aluminium anodized • 5 pieces • and milling board • for the cast iron jaws
  • integral fence jaws 500 / 650 mm • instead of multiplex plates
  • integral fence jaws 650 / 650 mm • instead of multiplex plates
  • filling bar • for the integral fence jaws
  • spreader • for the integral fence jaws
splinter tongue, aluminium anodized
safety rulers
integral fence jaws
filling bar


• milling arbors and tool changing systems

  • arbor Duo Ø 30 mm  MK 5 • mounting length 140 mm
  • arbor Duo Ø 40 mm  MK 5 • mounting length 160 mm
  • arbor Duo Ø 50 mm  MK 5 • mounting length 160 mm
  • quick clamping nut „fix“  Ø 30 mm
  • quick clamping nut „fix“  Ø 40 mm
  • quick clamping nut „fix“  Ø 50 mm
  • collet chuck MK 5 • with nut • without collet
  • collet for MK 5  Ø 3-25 mm • rising about 1 mm
  • tool changing system  with adapter HSK-F80(C)
    radial - sideway - handling with T-key • incl. 1 arbor HSK-F80 • Ø 30 x 125 mm 
  • arbor HSK-F80  Ø 30 mm • mounting length 125 mm
  • arbor HSK-F80  Ø 40 mm • mounting length 160 mm
  • arbor HSK-F80  Ø 50 mm • mounting length 160 mm
  • collet chuck HSK-F80 • with nut • without collet
  • collet for HSK-F80  Ø 4-26 mm • rising about 1 mm
  • arbor HSK-F63  Ø 30 mm • mounting length 140 mm • only on option "toolfix"
  • arbor HSK-F63  Ø 40 mm • mounting length 160 mm • only on option "toolfix"
  • arbor HSK-F63  Ø 50 mm • mounting length 160 mm • only on option "toolfix"
  • collet chuck HSK-F63 • with nut • without collet
  • collet for HSK-F63  Ø 6-25 mm • rising about 1 mm
arbor ''Duo''
tool changing system HSK-F80(C)
collet chuck

• feeder & equipment

  • feeder type 308 
    engine power 0,75 kW, 3 rolls, 8 speeds, incl. stand
  • feeder type 408 
    engine power 0,75 kW, 4 rolls, 8 speeds, incl. stand
  • continuously variable speed control 
    for feeder type 308 und 408 (400 Volt / 50 Hz / 3 phases) operating elements in the control panel

      +++ for other feeders we calculate a fee for adaptation

continuously variable speed control

• mortise and tenon

  • sliding table
  • height adjustable, insertable to the spindle and foldable
    hardened guide shaft with adjustable and highly precise ball-bearings 
    guide rail movable
    can be used as table extension because of its closed and finest planed surface
    eccentric fixers and protection hood are included (for tool-Ø from 250 to 350 mm)
    if using the hood max. speed is 4.500 rpm 
  • rip fence LAS 1.750 mm
  • rip fence LAS 2.750 mm
  • sliding table  incl. eccentric fixers 
    for mounting on the machine table
    usable table size 410 x 225 mm, total length 1.050 mm
    max. workpiece clamping length 1,20 - 1,50 m
    approx. moving range 710 mm
    design height above table 58 mm 
    with hardened guide shafts with adjustable and highly precise ball-bearings
  • protection hood for the sliding table (for tool-Ø from 250 to 350 mm) 
    (already included on sliding table order-no 50050)
total view of the sliding table
front view of the sliding table
sliding table as table extension
sliding table down-folded

total view of the rip fence
detail view of the rip fence
sliding table
protection hood

• safety and other useful equipment

  • Version –B
    Bowmouldmaster mounted on an  aluminium-insert plate • instead of FRS 95 • only available on option 'UFM Vision-B'
  • kickback guard 
    for insert moulding • with 2 mounting shafts
  • kickback guard 
    for insert moulding • without mounting shafts • kickback guard order-no 5121 is required
  • counter stop 
    with digital readouts • for the exact milling on size • adjustment range 90 mm • standard opening 165 mm
  • HOFMANN Guardian
    • locking of the fence jaws is controlled • if the jaws are not locked starting the machine is impossible resp. the running spindle stops • an unwanted crash of jaws and tool can be prevented • applied for a patent
  • HOFMANN Pointer
    for defining the zero point in height and depth • on reaching the zero point there is an optical and acoustical signal • wireless, therefore it‘s universally usable • works with all kinds of material, even with wood 
AIGNER Bowmouldmaster
chip collector and moulding guard FRS 95
kickback guard
counter stop with digital readouts

HOFMANN Guardian

• insert milling

  • insert milling device Quickmatic
    • made of a aluminium profile-system 
    • limit switch controlling for the tool diameter 
    • insert depth according counter, insert length adjustable according scale
    • insert and outset process is released fully automatic 
    • only possible in combination with feeder
    • the device is stacked for easy mounting
    • Machine has two operation modes: standard and insert moulding
  • insert milling Quickmatic „Multi-Step“
     multiple insert moulding device for UFM 210 VISION
    • either in height or depth (only one axis is possible at the same time)
    • option between one “Mono” and max. 20 insert mouldings: “Multi“ and Modus „A“ and „B“ 
    • “A”: at first the movement will be done, afterwards the insert moulding 
    • “B”: at first the insert moulding will be done, afterwards the movement
     insert and outset process is released totally automatic 
    • steps in different numbers, length and depth
    • for operating a separate SPS device is included 
     package also includes feeder with 6 rolls and continuously variable speed control


      examples in the gallery...


• equipment for CNC-technologie

  • USB-stick with backup software for CNC-eco und CNC-comfort 
    necessary to include own pictures of workpieces and tools
  • training on control mode CNC at HOFMANN factory or at customers company (plus travelling expenses)

• packing

  • transport packing (wooden planks round about) 
    strongly recommended for collective transport and Export !!!
  • see freight

• miscellaneous

  • special solutions one request
    some examples under products → special solutions

Please note that all optional equipment is listed without limitation or proofing the technical feasibility on single machine types.


sales brochure UFM VISION 210 (1,3 MB)