English   Deutsch   English   Français
You are here: Products > Milling > UFM Vision 210 > basic features & technical specifications

basic features

  • strongly ribbed cast iron table, finest planed surface; with extendable frame support by 480 mm
  • table slide with automatically depth adaptation; the adaptation works with every tool
  • changeable table insert, made of hard-coated aluminium, for tools up to Ø 160 mm and from Ø 160 to Ø 250 mm
  • spindle cone MK 5, milling arbor Duo Ø 30 mm; mounting length 125 mm
  • electrical height adjustment, vertically in the frame (no correction of the depth adjustment necessary if spindle has tilted) ca. 190 mm with rapid and creep speed, accurate to 0,1 mm
  • electrical swivel adjustment from - 45,5° up to + 95,5° with rapid and creep speed, accurate to 0,1°
  • electrical milling depth adjustment (the fence is fixed on the table, adjustments can now be carried out on the milling spindle) fast and slow run, accurate to 0,1 mm, nearly no correction of the feeder position necessary
  • variable speed from 1.500 to 10.000 rpm by direct driven spindle motor
  • choose speed by simply pressing a key for one of the 10 deposit speeds or variable through keyborard – without changing the V-belt
  • push button control with automatic contactor to start and stop the spindle
  • swivel unit is double-sided guided, with automatical clamping of the tilt angle
  • double-sided linear bearing of depth and height adjustment of the spindle
  • the fence is fixed on the machine table, adjustment of the infeed jaw according to a digital display to 0,1 mm; cast iron jaws 500/500 mm
  • operating hours counter, machine socket, fuse-protected, with plug for the feeder, operating elements placed in control panel
  • electrical spindle locking magnet, low maintenance machine
  • HOFMANN guard and thrusting device „Centrex“
  • 3 extraction chute Ø 120 mm at the fence and below the table; min. air volume 20 m³/min. at 378 pa
  • clockwise rotation by two hand operation with warning indication
  • electrical equipment according to VDE/EN 60204, master switch, emergency switch, motor protective switch, winding and under-voltage protection, contact for actuation of dust extraction system, brake, programme protection via key, serial interface for data read-out
  • equipment: operating tools, operating instruction
  • CE-conform
  • BG-wood dust mark no. 031042

attributes of the touchscreen control

  • 10,4" touchscreen TFT LCD VGA, 16-bit colour depth, 256 colours, visual angle 140°/110°
  • structure of control panels and symbols are the same in all masks
  • operation masks: manual, programs and tools
  • direct switching between different masks through permanent navigation bar; NO intermediate step like “home”-page
  • clearly organized user interface
  • symbols are always text-supported
  • easy, user-friendly, intuitive operation through hint and information line
  • program storage with 99999 program places (for optimal organisation); all axes are stored here as well as the speed
  • graphical display of the workpiece (self-made pictures of working pieces and tools can be inserted via usb)
  • tool storage with 99999 tool places (for optimal organisation); every information about the used tool is stored on this place
  • graphical display of the tools (self-made pictures of working pieces and tools can be inserted via usb)
  • search function for program and tool storage
  • spindle height and depth can be fine adjusted while the spindle is running
  • comfortable calibration of all axes
  • software key switch
  • USB interface for backup
  • changable menu language

equipment variants

  • UFM 210 VISION
    • 7,5 kW (10 PS) - 400 V, 50 Hz - direct drive
    • 3-axis control via touchscreen user interface for
    • height, tilt angle and depth
     7,5 kW motor including operation mode S1 and S6
      (only this guarantees a reliable work without breakdown if overload)
    • S1 = continuous operation with power of 7,5 kW
    • S6 = continuous operation with intermittent load with power of 10,5 kW
 
  • UFM 210 VISION – Stativ **
    • 7,5 kW (10 PS) - 400 V, 50 Hz - direct drive
     4-axis control via touchscreen user interface for
     spindel height, tilt angle, depth and height of the feed stand 
     7,5 kW motor including operation mode S1 and S6
      (only this guarantees a reliable work without breakdown if overload)
    • S1 = continuous operation with power of 7,5 kW
    • S6 = continuous operation with intermittent load with power of 10,5 kW
 
  • UFM 210 VISION „Toolfix“
    • 7,5 kW (10 PS) - 400 V, 50 Hz - direct drive
     includes an automatically tool clamping system 
    • high-frequecy electronic spindle  – water cooled
    • with interface HSK-F 63 / incl. 1 arbor HSK-F 63 Ø 30 x 140 mm
    • pneumatically arbor changing simply by pressing a button
    • with automatically blowing out device while changing the arbor 
    • tool pre-assembly station 
     3-axis control via touchscreen user interface for
     height, tilt angle and depth
     7,5 kW motor including operation mode S1 and S6
      (only this guarantees a reliable work without breakdown if overload)
    • S1 = continuous operation with power of 7,5 kW
    • S6 = continuous operation with intermittent load with power of 10,5 kW
 
  • UFM 210 VISION – Stativ ** „Toolfix“
    • 7,5 kW (10 PS) - 400 V, 50 Hz - direct drive
     includes an automatically tool clamping system 
    • high-frequecy electronic spindle  – water cooled
    • with interface HSK-F 63incl. 1 arbor HSK-F 63 Ø 30 x 140 mm 
    • pneumatically arbor changing simply by pressing a button
    • with automatically blowing out device while changing the arbor 
    • tool pre-assembly station
     4-axis control via touchscreen user interface for
     spindel height, tilt angle, depth and height of the feed stand 
     7,5 kW motor including operation mode S1 and S6
      (only this guarantees a reliable work without breakdown if overload)
    • S1 = continuous operation with power of 7,5 kW
    • S6 = continuous operation with intermittent load with power of 10,5 kW
 
  • UFM 210 VISION-B
    • useful for curved moulding operation mode 
    including 
     moulding guard FRS 95 mounted on an insert plate (aluminium) 
    • fence removable
 

technical specifications

UFM 210 Vision

table width

mm

820

table length *

mm

1.625

table height

mm

900

max. tool Ø

mm

250

swivel range

°

- 45,5 bis + 95,5

spindle cone

MK5 * / HSK-F63 / HSK-F80

spindle Ø *

mm

30

mounting length *

mm

125

height adjustment range up to

mm

190

height adjustment range ''operation support''

mm

155-175

engine power

kW

7,5**  (direct drive)

engine speed

rpm

1.500 - 10.000  (stepless)

extraction chutes (3 chutes) Ø

mm

120

minimum airflow

m3/h

1200

weight

kg

1400

total footprint approx.

mm

1357

* standard configuration, optionally upgradable

** a direct drive transfers significantly more torque compared to drives with belt; high-quality inverter enables operation mode S6 - allows continuous operation with intermittent load with power of 10,5 kW