English   Deutsch   English   Français
You are here: Products > Milling > TF(S) 1245 > basic features & technical specifications

basic features

  • proven design in cast iron, box for equipment integrated in covering panel; tool deposit
  • strongly ribbed iron cast table with a finest planed surface
  • table rings Ø 420 / 252 / 206 / 150 / 105 / 66 mm
  • loose moulding spindle chuck MK 5, milling arbor Duo Ø 30 x 140 mm
  • motorized height adjustment approx. 145 mm, fast and slow run, LED display to 1/10 mm
  • 4 standard speeds 3.000 / 4.500 / 6.000 / 9.000 rpm; with LED indication
  • overhanging control panel
  • push button control with electronic smooth start and electronic break (wear-free)
  • swivel unit is double-sided guided by two segment guidances
  • fence type 2601 Efficient, central fast adjustment with hand wheel according digital read-out and fine tuning of the infeed jaw with cylinder rotary knob, with vernier; fence is rotatable 360°; set of cast iron jaws 500 / 500 mm with slots for safety rulers and milling board. Tool-Ø max. 250 mm
  • electrical spindle locking magnet (unconscious starting is not possible)
  • machine socket, fuse-protected, with plug for the feeder; on/off button in operating panel of machine
  • low maintenance machine
  • HOFMANN guard and thrusting device “Centrex”, chip collector and moulding guard FRS 95 for working at ring fence with suction chute
  • 2 suction chutes Ø 120 mm at the fence and below the table; minimum air volume 24 m³/min. at 370 pa
  • clockwise run by two hand operation with warning indication
  • electrical equipment in accordance to VDE/EN 60204 with master switch, emergency key, motor protective switch, wind-ing and under-voltage protection, contact for actuation of dust extraction system, brake
  • equipment: operating tools, press of grease, operating instruction
  • packing: machine is wrapped around with stretch-film, bare parts are sprayed with protection against moisture
  • paint: grey white RAL 9002, agate grew RAL 7038, signal blue RAL 5005, white aluminium RAL 9006
  • CE-conform
  • BG-wood dust mark no. 021056

technical specifications

TF(S) 1245

table width

mm

815

table length *

mm

1.250

machine heigth

mm

890

table rings-Ø *

mm

420/252/206/105/66

swivel range **

°

- 45,5 bis + 45,5

spindle Ø *

mm

30

mounting length *

mm

140

max. height range of the spindle till

mm

150

max. height range of operating support (optional)

mm

0-175

engine power *

kW

7,5

engine speeds*

U/min.

3.000/4.500/6.000/9.000

extraction chute Ø (2 chutes)

mm

120

minimum airflow

m3/h

1440

weight

kg

950

depths footprint max

mm

1195

* standard configuration, optionally upgradable
** only on TFS 1245, because TF 1245is not tiltable

Dimensions

top view
top view 2m-table
side view