English   Deutsch   English   Français
You are here: Products > Milling > TFS 1260 > basic features & technical specifications

basic features

  • proven design in cast iron, box for equipment integrated in covering panel; tool deposit
  • strongly ribbed iron cast table with a finest planed surface
  • Sliding bed plate: adjustment via manual spindle drive, including insert of hard-coated aluminium for tools up to Ø 250 mm • with quick-lock function and adapter for a fast adjustment • no table rings, fence not rotatable
  • changeable table insert, made of hard-coated aluminium, for tools up to Ø 160 mm and from Ø 160 to Ø 250 mm 
  • loose moulding spindle chuck HSK-F63, milling arbor Duo Ø 30 x 140 mm 
  • motorized height adjustment approx. 145 mm, rapid and creep speed,  indication accurate to 1/10 mm
  • motorized tilt adjustment from - 60° up to + 60°,  rapid and creep speed, indication accurate to 0,1° 
  • motorized depths adjustment approx. 125 mm, rapid and creep speed,  indication accurate to 1/10 mm 
  • variable speed from 1.500 to 10.000 rpm by direct driven spindle motor
  • choose speed by simply pressing a key for one of the 10 deposit speeds or variable through keyborard – without changing the V-belt  
  • overhanging control panel
  • swivel unit is double-sided guided by two segment guidances
  • fence type 2601 Efficient, central fast adjustment with hand wheel according digital read-out and fine tuning of the infeed jaw with cylinder rotary knob, with vernier; fence is rotatable 360°; set of cast iron jaws 500 / 500 mm with slots for safety rulers and milling board. Tool-Ø max. 250 mm
  • the fence is fixed on the machine table, adjustment of the infeed jaw according to a digital display accurate to 0,1 mm; cast iron jaws 500/500 mm 
  • electrical spindle locking magnet (unconscious starting is not possible)
  • machine socket, fuse-protected, with plug for the feeder; on/off button in operating panel of machine
  • low maintenance machine
  • HOFMANN guard and thrusting device “Centrex”, chip collector and moulding guard FRS 95 for working at ring fence with suction chute
  • 2 suction chutes Ø 120 mm at the fence and below the table; minimum air volume 24 m³/min. at 370 pa
  • clockwise run by two hand operation with warning indication
  • electrical equipment in accordance to VDE/EN 60204 with master switch, emergency key, motor protective switch, wind-ing and under-voltage protection, contact for actuation of dust extraction system, brake
  • equipment: operating tools, press of grease, operating instruction
  • packing: machine is wrapped around with stretch-film, bare parts are sprayed with protection against moisture
  • paint: grey white RAL 9002, agate grew RAL 7038, signal blue RAL 5005, white aluminium RAL 9006
  • CE-conform
  • BG-wood dust mark no.

attributes of the touchscreen control

  • 5,7 " or 10,4" (optional) touchscreen TFT LCD VGA, 16-bit colour depth, 256 colours, visual angle 140°/110° 
  • structure of control panels and symbols are the same in all masks 
  • operation masks: manual, programs and tools
  • direct switching between different masks through permanent navigation bar; NO intermediate step like “home”-page
  • clearly organized user interface 
  • symbols are always text-supported
  • easy, user-friendly, intuitive operation through hint and information line 
  • program storage with 99999 program places (for optimal organisation); all axes are stored here as well as the speed
  • graphical display of the workpiece (self-made pictures of working pieces and tools can be inserted via usb)
  • tool storage with 99999 tool places (for optimal organisation); every information about the used tool is stored on this place
  • graphical display of the tools (self-made pictures of working pieces and tools can be inserted via usb)
  • search function for program and tool storage 
  • spindle height and depth can be fine adjusted while the spindle is running 
  • comfortable calibration of all axes 
  • software key switch
  • USB interface for backup 
  • changable menu language

technical specifications

TFS 1260

table width

mm

815

table length *

mm

1.250

machine heigth

mm

890

max. tool Ø 

mm

250

swivel range **

°

- 60,0 bis + 60,0

spindle Ø *

mm

30

mounting length *

mm

140

max. depth range of the spindle

mm

125

max. height range of the spindle

mm

150

max. height range of operating support (optional)

mm

0-175

engine power

kW

7,5**  (direct drive) 

engine speeds*

rpm

1.500 - 10.000  (stepless) 

extraction chute Ø (2 chutes)

mm

120

minimum airflow

m3/h

1440

weight

kg

950

depths footprint max

mm

1195

* standard configuration, optionally upgradable
** a direct drive transfers significantly more torque compared to drives with belt; high-quality inverter enables operation mode S6 - allows continuous operation with intermittent load with power of 10,5 kW